30 BAS-SVX50F-EN
Reports
2. Use the arrow buttons to locate the item to be reordered. When located, touch the item which
will then be highlighted blue (see
Figure 17).
3. Use the arrow buttons to move the highlig
hted item to the top of the list (number 1 position).
4. Touch Save. You will be returned to the Custom Re
port screen, where the reordering changes
now appear.
Note: On the TD7 display, report items are ordered from left to
right with the first item appearing
at the top left portion of the screen. Up to nine items can appear on each Custom Report
screen with a maximum of 4 screens and 36 items per report.
The model in Figure 18 depicts a custom report screen with the first nine items displayed on the
screen
. Use th
is model to accurately reorder items in your custom reports.
Figure 18. Custom Report (order of items)
Override Summary
The TD7 has a built in override summary report that can be accessed in one of two ways:
• The preferred method is to access the report by touching
the Override Summary button located
in the top display area of each TD7 screen. See “Top Display Area,” p. 10.
• An alternate method is to touch the Override Summ
ary button on the Reports screen.
The Override Summary screen contains all active over
rides. Columns are sortable and
automatically default to Time Remaining.
The override icon (
) indicates that a point override is in effect indefinitely. The temporary
override icon ( ) indicates that an override will expire after a specified duration.
To release all overrides in the list, touch the Release Al
l Overrides button (only points that are
controlled at priority level 8 will be released). To release a single override, see “Override Status
Area,” p. 22.
Touch anywhere in a point row to navigate to the
corresp
onding Point Override screen.
Custom Report
1
23
4
5
6
7
8
9
To Next Page
Loading...
Need help?
General
