32 BAS-SVX50F-EN
Reports
About
Touch the About button to view the About screen. View information about the unit controller and
the TD7 display to which it is connected. Touch the arrow button to scroll to the next screen.
Figure 21. About screen
Controller Name
This is the name that was assigned to the UC600 in Tracer TU.
Unit Model Number
This is the model number of the AHU/equipment on which the UC600 is installed. This value is
typically entered in the factory, but can be entered in the UC600 controller. If the equipment was
field-installed, this field will be blank.
Unit Sales Order Number
This is the order number for the equipment that the UC600 is controlling. This number is typically
entered at the factory, but can be entered in the UC600 controller. If the equipment was field-
installed, this field will be blank.
Unit Serial Number
This number applies to the piece of equipment that the UC600 is controlling. his number is typically
entered at the factory, but can be entered in the UC600 controller. If the equipment was field-
installed, this field will be blank.
Controller Product Name
The controller product name will always be UC600.
Controller Hardware Date Code
This is the serial number of the UC600.
Controller Hardware Part Number
This is the part number for the UC600, whether factory or field-mounted it will be the same.
To Next Page
Loading...
Need help?
General
