19
1j. Trip A and B
Trip meter indicates the trip distance traveled in
kilometer. The digit after the dot mark denotes one
tenth of a kilometer.
Provision is provided for the users to measure two
different distances as per their convenience.
In street mode, ‘TRIP A’ will be displayed by default.
Press mode button once to enter ‘TRIP B’. To reset
any of the trips (A or B), press the ‘SET’ button more
than 3 seconds while display is in the respective trip
in vehicle static condition only.
Trip F
This function shows the distance traveled after the
low fuel indication symbol ( ) is ‘ON’ and ‘FUEL
ON RESERVE’ message displayed at alpha numeric
display. The display switches automatically to ‘TRIP
F’ once the low fuel indication is ‘ON’ and starts
counting from 0.0 km.
If the fuel level remains in minimum safe (reserve)
level, the reading will be saved even after the ignition
‘OFF’.
The ‘TRIP F’ meter stops counting and gets cleared
automatically once the fuel is filled above minimum
safe (reserve) level which is indicated by at-least
2 bars in the fuel gauge. Once TRIP F is cleared,
Trip A / B display switches ON automatically. Please
remember that the ‘TRIP F’ meter cannot be
activated or deactivated manually and can’t be
reset.
On every ignition ON, ‘TRIP F’ meter will get enabled
automatically until fuel level raises above minimum
safe level. ‘TRIP A’ and ‘TRIP B’ will still be accessed
by short pressing the ‘Mode’ switch but the display
will automatically enter ‘TRIP F’ after 5 seconds.
To Next Page
Loading...
Need help?
General
