TVS NTORQ 125 User Manual

41
3. Screw driver handle
4. Tool bag
It is recommended to use the tool kit in case of any
emergency only. It is always advisable to take your
vehicle to TVS Motor Company Authorised Main Dealer
/ Authorised Dealer.
Caution
Operating the TVS NTORQ 125 overloaded will hamper
riding stability and may lead to loss of control. Hence, it
is advisable to carry the recommended amount of load
only.
Warning
UTILITY BOX
Utility box is located below the seat. Lift the seat by
unlocking the seat lock as explained in the previous
page, to access the utility box. A separate cover (A) is
provided inside the utility box. Remove this cover to
access the carburettor for servicing purpose.
A

TVS NTORQ 125 Specifications

General

Displacement	124.8 cc
Max Torque	10.5 Nm @ 5, 500 rpm
Fuel System	Fuel Injection
Transmission	CVT
Front Brake	Disc
Rear Brake	Drum
Kerb Weight	118 kg
Front Tyre	100/80-12
Rear Tyre	110/80-12
Starting Method	Electric Start
Tyre Type	Tubeless
Seat Height	770 mm
Ground Clearance	155 mm
Engine Type	Single Cylinder, 4-Stroke, Air Cooled
Front Suspension	Telescopic
Fuel Tank Capacity	5.8 liters
Wheelbase	1285 mm
Rear Suspension	Coil Spring, Hydraulic Damped