TVS NTORQ 125 User Manual

42
HELMET HOOKS
Two helmet hooks are provided under the seat
assembly at front end near the seat hinge to secure
your helmet. Open the seat assembly (refer page no.
40) to access the helmet hooks. Hook the helmet
strap in the helmet hook properly and close the seat
assembly.
BAG HOOKS
There are two bag hooks provided with your scooter
to carry light luggage like carry bags weighing upto
3 kg. One hook is located below handle bar on the
rear panel.
Just pull out the hook from the top (A) to hang your
luggage. Push back the hook once it is free.
Similarly, the other one is located on the cover front
below front end of the seat assembly. Pull out the
hook from its position. Open the top lid and hang
your cargos. Lid will get close automatically. Push
back the hook to its original position once it is free.
Care should be taken not to attach the luggage which
hangs out of your scooter. Please note that the luggage
attached to your scooter should not interfere your feet
movement.
Caution
A

TVS NTORQ 125 Specifications

General

Displacement	124.8 cc
Max Torque	10.5 Nm @ 5, 500 rpm
Fuel System	Fuel Injection
Transmission	CVT
Front Brake	Disc
Rear Brake	Drum
Kerb Weight	118 kg
Front Tyre	100/80-12
Rear Tyre	110/80-12
Starting Method	Electric Start
Tyre Type	Tubeless
Seat Height	770 mm
Ground Clearance	155 mm
Engine Type	Single Cylinder, 4-Stroke, Air Cooled
Front Suspension	Telescopic
Fuel Tank Capacity	5.8 liters
Wheelbase	1285 mm
Rear Suspension	Coil Spring, Hydraulic Damped