36
3a. Lights switch (not applicable for Race edition)
Light switch has the following positions. Working of
switch at various position are as follows:
OFF: Head lamp is turned ‘OFF’ when the switch is
positioned at ‘ ’ even though the engine is
running.
ON: When the switch is positioned at ‘ ’ head
lamp glows while the engine is running. The
DRL intensity reduces to 50% on switching
on the head lamp.
3b. Hazard switch (applicable only for Race
edition)
Before starting, ensure to turn ‘ON’ the engine kill
switch. Release the electric starter switch immediately
after the engine has started.
** Applicable only for Disc Brake version
Usage of hazard switch in engine ‘OFF’ condition
can lead to battery drain and can affect the electric
startability of the vehicle.
Whenever it is necessary to park the scooter in a
hazardous location due to emergency situation, press
the hazard switch to ‘ ‘ position with the ignition
‘ON’ condition. This makes all the turn signal lamps to
flash simultaneously to make other road users aware
of presence of the vehicle.
4. Electric starter switch
Press the starter switch ‘ ’ to start the engine
electrically along with the application of either front
or rear brake.
5. Engine kill switch**
It is used to switch off ‘ ‘ the engine but to
keep other DC system active. The ignition circuit is
disabled, preventing the engine from being restarted.
To reset the engine, return the switch to the ‘ ‘
position.
To Next Page
Loading...
Need help?
General
