100 Using team functions
Accepting a call for another member of your
team
You can use your own telephone to accept calls for other telephones in your
team, even while engaged in an ongoing call. To do this, contact your service
personnel to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. The display shows "call at:" with the
phone number/name of the initiator, and number/name of the caller in the lower
line.
Confirm.
Ringing group
You can have calls for your telephone signaled audibly at up to five other internal
phones. The phone that answers the call first receives the call.
Saving, displaying, and deleting telephones for the ringing group
N Open the Program/Service menu Page 27.
Confirm.
Select and confirm the option shown
1
.
Follow the display prompts (enter the internal station number).
Removing all telephones in a call ringing group
Select and confirm the option shown.
Special features must be taken into consideration if your telephone oper-
ates with HiPath 5000 (system networking via PC network) Page 106!
1. ”Differing display view in a HiPath 4000 environment” Seite 113
If your phone belongs to a ringing group, your display will show the station
number or the name of the originator on the upper line and that of the caller
on the lower line.
To Next Page
Loading...
Need help?
General
