Unify OpenStage 40 T User Manual

56 Enhanced phone functions
Preventing and allowing call waiting
(automatic camp-on)
If this function has been configured (ask your service personnel), you can pre-
vent or allow a second call  Page 55 from being signaled by automatic camp-
on during an ongoing call.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown
1
,
or
select and confirm the option shown.
Turning the call waiting tone on and off
You can suppress the call waiting tone (every six seconds) for external calls. A
one-time special dial tone then alerts you to the waiting call.
Activating the call waiting tone
c Open the idle menu  Page 22.
Select and confirm the option shown.
Deactivating the call waiting tone
c Open the idle menu  Page 22.
Select and confirm the option shown.
Saving a number
You can save your call partner’s station number for subsequent redialing from
the caller list
 Page 48.
Prerequisite: You are on a call or an external station is being called.
Confirm.
Call wait.trm.off
1. ”Differing display view in a HiPath 4000 environment”  Seite 113
Call wait.term.on
Waiting tone on
Waiting tone off
Save number

Unify OpenStage 40 T Specifications

General

Speakerphone	Yes
Base station keys	12
Mac compatibility	No
Display diagonal	5.1 \
Display resolution	240 x 128 pixels
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Blue