70 Displaying and assigning call charges
Displaying and assigning call charges
Displaying call charges (not for U.S.)
For the current call
Call charges are shown by default on the display when a call ends.
If you want to display call charges as they occur during a chargeable call, your
service personnel must request this option from the network operator.
Call charge display must be requested from the network operator and configured
by the relevant service personnel.
Depending on the setting, call charges are displayed during or after a call.
Depending on the network operator, free external calls are also displayed. The
message "Free of Charge" appears on the screen either before or during the
call.
If the cost indication facility has not been installed, the display will show the di-
aled number and/or the length of the telephone call.
For all calls and for the last call
Connection charges for the last chargeable call made are displayed first. After
five seconds, the accumulated connection charge (total) is displayed.
N Open the Program/Service menu Page 27.
Select and confirm the option shown.
Select and confirm the option shown
1
.
If a call is forwarded, call charges are assigned to the destination of the call
transfer operation.
1. ”Differing display view in a HiPath 4000 environment” Seite 113
To Next Page
Loading...
Need help?
General
