Unify OpenStage 40 T User Manual

Getting to know your OpenStage phone 19
Programmable sensor keys
Your OpenStage 40 T has six illuminated sensor keys. You can assign functions and phone num-
bers to them on two levels.
Depending on how they are programmed, you can use the sensor keys as:
• Function keys  Page 64
• Repdial keys
 Page 68
• Procedure keys
 Page 67
Touch the key to activate the programmed function or dial the stored number.
Press the key to open a menu for programming it  Page 67.
A label for the function is displayed to the left of the key. You can define the labeling according to
your requirements
 Page 69.
The status of a function is shown by the LED on the corresponding sensor key.
Meaning of LED displays on function keys and DSS keys
Increase the number of programmable sensor keys by connecting a key module  Page 14.
You can program all programmable sensor keys (except "Shift") on two levels. The Shift key
 Page 64 must be configured for this, and extended key functionality must be active (con-
tact your service personnel).
In addition to functions and procedures, external phone numbers and internal numbers with-
out LED display can also be saved on the second level  Page 68.
LED Meaning of function key Meaning of DSS key
S Off The function is deactivated. The line is free.
T Flashing
1
1 In this manual, flashing sensor keys are identified by this icon, regardless of the flashing interval. The flashing interval
represents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status. The line is busy.
R On The function is activated. There is a call on the line.
The programmable sensor keys on multi-line phones function as trunk keys  Page 92.
Mirea, Ch
Layer 1

Unify OpenStage 40 T Specifications

General

Speakerphone	Yes
Base station keys	12
Mac compatibility	No
Display diagonal	5.1 \
Display resolution	240 x 128 pixels
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Blue