Unify OpenStage 40 T User Manual

More functions/services 83
Changing a number (after exchanging/ moving/
relocating a phone)
When configured (consult your service personnel),you can move your number
to any other phone. Your phone to date is then assigned the old number of your
new phone; the number including phone settings (e. g. programmed keys) are
exchanged.
Prerequisite: Your old and new telephone are the first telephones at each con-
nection. The telephones are in idle state.
The following procedure is carried out on the new phone.
N Open the Program/Service menu  Page 27.
Select and confirm the option shown.
j Enter own station number.
j Enter code (telephone lock)  Page 77.
(Not necessary if you have not set a code.)
Confirm.
Relocate
Complete relocate
If you change numbers of different system phones, programmed keys are
replaced with the default assignment.

You can however connect your phone to a different port and then carry out
the procedure.

Unify OpenStage 40 T Specifications

General

Speakerphone	Yes
Base station keys	12
Mac compatibility	No
Display diagonal	5.1 \
Display resolution	240 x 128 pixels
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Blue