Unify OpenStage 40 T User Manual

Privacy/security 73
Privacy/security
Turning ringer cutoff on and off
If you do not wish to take calls, you can activate the ringer cutoff function. Calls
are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such
as a trunk key).
Activating
c Open the idle menu  Page 22.
Select and confirm the option shown
1
.
Deactivating
c Open the idle menu  Page 22.
Confirm.
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you can activate do not disturb. Internal callers
hear the busy tone, external callers are connected to another phone, which you
can specify (contact your service personnel).
Activating
c Open the idle menu  Page 22.
Select and confirm the option shown.
Activating
c Open the idle menu  Page 22.
Confirm.
Ringer cutoff on
1. ”Differing display view in a HiPath 4000 environment”  Seite 113
Ringer cutoff off
DND on
DND off
When you lift the handset, you will hear a special tone (continuous buzz-
ing) reminding you that "Do not disturb" is activated.
Authorized internal callers automatically override the DND feature after
five seconds.

Unify OpenStage 40 T Specifications

General

Speakerphone	Yes
Base station keys	12
Mac compatibility	No
Display diagonal	5.1 \
Display resolution	240 x 128 pixels
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Blue