2. Warnings and Precautions
7
I
PaX-i3D Smart
English
● Observe all local fire regulations. Always keep a fire extinguisher near the equipment.
● The operator of this equipment must be familiar with this equipment’s emergency
protocols.
● Ensure that this equipment is kept away from water, moisture, or foreign substances
at all times.
● If this product is exposed to water, moisture, or a foreign substance, immediately
turn off all power to the equipment and contact your VATECH technical support
representative.
● Immediately cease all operation of this equipment if there are signs of oil leakage and
contact you VATECH technical support representative.
❚
Ventilation
● Do not obstruct the equipment’s ventilation for air opening. Improper ventilation
could result in the equipment overheating due to a lack of air circulation.
● Do not spray any type of liquid or aerosol on this equipment as this may penetrate
the system and damage the electrical and mechanical components inside.
● Always leave a sufficient amount of space around the PC to allow for proper
ventilation.
❚
Hygiene
Always disconnect the equipment from the power outlet when cleaning
the surfaces of the equipment.
● All removable patient support components (bite block, chin support, temple
supports) can be cleaned using alcohol-based cleaning solutions.
● Patient support handles can be cleaned using alcohol-based cleaning solutions.
● Other surfaces of the equipment can be cleaned using a soft cloth dampened with a
mild cleaning solution.
To Next Page
Loading...
Need help?
General
