2. Warnings and Precautions
12
I
PaX-i3D Smart
● The operator must immediately stop imaging if the equipment malfunctions.
● The operator should be at least 2 m (6 feet) away from the equipment during
imaging.
As a manufacturer of radiology equipment that conforms to stringent protection
standards around the world, we guarantee the maximum degree of protection
against radiation hazards for our equipment.
2.4
Warnings
The following warning statements should be obeyed with the utmost care. Failure to
follow these warnings may cause severe damage to the equipment or physical injuries to
the patient and/or operator.
X-ray equipment is hazardous to patient and the operator if proper exposure
safety measures and/or operating instructions are not observed.
It is important to read this user manual carefully and strictly abide by all
warnings and cautions stated within it.
● 3D image should not be used for screening examinations. Each exam must
be justified by demonstrating that the benefits outweigh the risk.
● Where it is likely that evaluation of soft tissues will be required as part of the
patient’s radiological assessment, conventional medical CT or MR should be
used instead of dental cone beam imaging.
To Next Page
Loading...
Need help?
General
