2. Warnings and Precautions
14
I
PaX-i3D Smart
❚
Cleaning
● Never expose this equipment to liquids, mists or sprays. Exposing this equipment to
liquids may cause an electrical shock or otherwise damage the system.
● Do not use spray cleaners on this equipment, as this could cause a fire.
❚
During Operation
● Never use this equipment in an environment that is susceptible to explosion.
● Do not place flammable materials near this equipment.
● Do not operate the PC while the equipment is performing an operation. Failure to
comply with this instruction may result in system malfunction.
● Immediately stop imaging if the equipment malfunctions in any way.
● If a problem occurs during imaging, press the red emergency stop button to
immediately stop all moving parts and cut off all power to the equipment’s electrical
components.
● Never touch the patient while also touching the SIP/SOP connectors.
● The medical electrical equipment or medical electrical system should not be used
adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the medical electrical equipment or medical electrical system should be
observed to verify normal operation in the configuration in which it will be used.
● The use of accessories, transducers and cables other than those specified, with
the exception of transducers and cables sold by the VATECH of the medical
electrical equipment or medical electrical system as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY of
EQUIPMENT or SYSTEM.
❚
In case of electrical fire
● Use only fire extinguishers designed for electrical fires to extinguish fires on this
equipment.
Liquid extinguishers, such as those which use water, could damage the equipment and/or
cause injury.
● Unplug the equipment’s power cable before extinguishing any fire.
To Next Page
Loading...
Need help?
General
