104
Dial modes
Set dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone
to make a call.
Using a cordless handset or telephone
base:
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to choose
Settings, and then press
MENU/SELECT to select.
3. Press q CID or p to choose Dial
mode, and then press MENU/SELECT
to select.
4. Press q CID or p to choose
Touch-tone or Pulse, and then press
MENU/SELECT to select.
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This is
useful if you need to send touch-tone
signals to access your telephone banking
or long distance services.
Using a cordless handset or telephone
base:
1. During a call, press .
2. Use the dialing keys to enter the
number.
• The telephone sends touch-tone
signals.
• The telephone automatically
returns to pulse dialing mode after
you end the call.
To Next Page
Loading...
Need help?
General
