VTech IS8128-5 User Manual

22
Set up Answering System through Voice
Guide (Before use)
This feature assists you to do the basic
setup of the answering system. You can
follow the voice guide to record your
own announcement, set the number of
rings and the message alert tone.
1. Press MENU/SELECT to start the voice
guide for the answering system setup.
You hear the voice prompt “ This voice
guide will assist you with the basic
setup of your answering system.”
2. Setup your answering system by
inputting the designated numbers as
instructed in the voice guide.
Alternate way to set up
This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide
to record your own announcement, set
the number of rings and the message
alert tone.
1. Press MENU/SELECT on the telephone
base in idle mode.
2. Press q CID or p to scroll to
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p to scroll to Voice
guide, the press MENU/SELECT. You
hear the voice prompt “This voice
guide will assist you with the basic
setup of your answering system.”
4. Set up your answering system by
inputting designated numbers as
instructed in the voice guide.
NOTES
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time, and Smart call blocker. After
these settings are done or skipped,
the telephone base then prompts
if you want to set up the answering
system via voice guide. Press
MENU/SELECT to start the setup.

VTech IS8128-5 Specifications

General

Brand	VTech
Model	IS8128-5
Category	Cordless Telephone
Language	English