VTech IS8128-5 User Manual

98
Answering system remote access
A two-digit security code is required to
access the answering system remotely
from any touch-tone telephone. The
preset code is 19. You can use this preset
code, or set your own.
1. Dial your telephone number from any
touch-tone telephone.
2. When the system plays your
announcement, enter the two-digit
security code.
3. Enter one of the following remote
commands.
Command Description
1 Play all messages.
2 Play new messages.
3
Delete the current messages (during
playback).
33 Delete all old messages.
4
Repeat the current message (during
playback).
5 Stop
*5 Hear a list of remote commands.
6
Skip to the next message (during
playback).
*7 Record a new annoucement.
8 End the call.
0 Turn the answering system on or off.
4. Hang up or press 8 to end the call.
NOTES
• If you do not press any keys after you
enter the remote access code, all new
messages play. If there are no new
messages, all old messages play.
• Once the new messages have played,
the telephone announces the help
menu options. If you do not press any
key within 20 seconds, the remote
access call automatically disconnects.
• When the answering system memory
is full, the telephone announces,
“Memory is full. Enter the remote
access code.”
• When the answering system is off, the
telephone answers after 10 rings, and
announces, “Please enter your remote
access code.”

VTech IS8128-5 Specifications

General

Brand	VTech
Model	IS8128-5
Category	Cordless Telephone
Language	English