VTech IS8128-5 User Manual

79
Delete all allow list entries
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Allow
list, then press MENU/SELECT.
3. Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The handset shows Delete all?.
- OR -
Press q CID or p to highlight
Delete all, then press MENU/SELECT.
The telephone base shows Delete
all in allow list?.
4. Press MENU/SELECT again to confirm.
The handset displays Deleting..., or
the telephone base displays Deleted.
There is a confirmation tone.
Star name list
There are many organizations like
schools, medical offices, and pharmacies
that use robocalls to communicate
important information to you. Robocall
uses an autodialer to deliver pre-
recorded messages. By entering the
name of the organizations into the star
name list, it ensures these calls will ring
through when you only know the caller
names but not their numbers.
If the first 15 characters of the incoming
caller ID’s name match a name saved in
your star name list, the call will get
through and ring. The star name list
stores up to 10 names.
Add a star name entry
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Star
name list, then press MENU/SELECT.
3. Press q CID or p to scroll
to Add new entry, then press
MENU/SELECT.

VTech IS8128-5 Specifications

General

Brand	VTech
Model	IS8128-5
Category	Cordless Telephone
Language	English