VTech IS8128-5 User Manual

38
Intercom
Use the intercom feature for conversations
between two devices.
You can register up to five handsets to
the telephone base.
Initiate an intercom call
Using a cordless handset
1. Press MENU/SELECT on the handset
in idle mode.
2. Press q CID or p to highlight
Intercom, then press MENU/SELECT.
3. Press q CID or p to select a device.
The handset shows Calling HS X or
Calling Base (X represents the handset
number). The destination handset
rings and shows HS X is calling.
To answer an intercom call with the
cordless handset:
• Press HOME/FLASH, CELL,
OFF/CANCEL or on the handset.
Both devices now show Intercom.
To end an intercom call with the cordless
handset:
• Press OFF/CANCEL or place the
handset back in the telephone base
or charger.
Using the telephone base
1. Press INT on the telephone base.
-OR-
Press MENU/SELECT on the telephone
base in idle mode, then press q CID
or p to highlight Intercom. Press
MENU/SELECT.
2. Press q CID or p to select a device.
The telephone base shows Calling HS
X (X represents the handset number).
The destination handset rings and
shows Base is calling.
To answer an intercom call with the
telephone base:
• Press HOME or CELL on the telephone
base. Both devices now show
Intercom.
To end an intercom call with the telephone
base:
• Press CANCEL on the telephone base.
NOTES
• To cancel the intercom call before it is
answered, press OFF/CANCEL on the
handset, or press CANCEL or INT on
the telephone base.
• If the destination device does not
answer the intercom call within 100
seconds, or if the device is in use, on
a call, or out of range, the initiating
telephone base displays No answer,
try again, or the initiating handset
displays Unable to call, and returns to

VTech IS8128-5 Specifications

General

Brand	VTech
Model	IS8128-5
Category	Cordless Telephone
Language	English