114
Clear voicemail indicator/indication
Use this feature when the telephone
indicates there is new voicemail but
there is none. For example, when you
have accessed your voicemail while
away from home. This feature only turns
off the displayed New voicemail and
the icon; it does not delete your
voicemail messages. As long as you have
new voicemail messages, your telephone
service provider continues to send the
signal to turn on the indicator.
To manually turn off the new voicemail
indicator:
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to scroll
to Settings, and then press
MENU/SELECT.
3. Press q CID or p to highlight
Clr voicemail, then press
MENU/SELECT to turn the voicemail
indicator off.
NOTE
• Your telephone service provider
voicemail might alert you to new
messages with a stutter (broken) dial
tone. Contact your telephone service
provider for more details.
Add and register handset
When your handset is deregistered from
the telephone base, follow the steps
below to register it back to the telephone
base.
1. Before you begin registration,
make sure the handset is out of the
telephone base or charger and shows
To register HS... and ... see manual.
2. Put the handset you wish to register
on the telephone base cradle.
3. The telephone base shows
Registering... Please wait, and the
handset then shows Registering....
If the registration is successful, the
handset screen displays Registered
and beeps. The handset is now
registered with the telephone base.
If registration fails, the system will
automatically try to register again. If
registration fails after the third try,
Registration failed appears on the
handset screen. The handset shows To
register HS... and ...see manual, and the
telephone base returns to idle mode.
This may take up to five minutes to occur.
Please start again from Step 1.
NOTE
• If your handset is new, make sure
you charge it before attempting
registration.
To Next Page
Loading...
Need help?
General
