VTech IS8128-5 User Manual

85
Voice guide to set Smart call
blocker
This feature is an easy and alternative way
for you to do the basic setup of Smart
call blocker. You can follow the voice
guide to set your telephone system to
allow or to screen all incoming home
calls, or to screen home calls that do not
display a phone number.
1. Press CALL BLOCK on the handset
or telephone base to enter the call
block menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll
to Voice guide, then press
MENU/SELECT.
3. You hear a voice prompt “Hello! This
voice guide will assist you with the
basic setup of Smart call blocker...”
4. Set up your Smart call blocker
feature by inputting the designated
numbers, as instructed in the voice
guide.
• Press 1 if you want to screen home
calls with telephone numbers that
are not saved in your phonebook,
allow list or star name list; or
• Press 2 if you do not want to
screen calls, and want to allow all
incoming calls to get through.
NOTES
• The screening feature of Smart call
blocker is applicable to home calls
only. All incoming cell calls will get
through and ring. If you want to
block a cell call, add the number to
the block list. See Block list.
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time. After the date and time setting
is done or skipped, the telephone
base will prompt if you want to
set up Smart call blocker via voice
guide. Press MENU/SELECT to start
the setup.

VTech IS8128-5 Specifications

General

Brand	VTech
Model	IS8128-5
Category	Cordless Telephone
Language	English