5-48 BA ET16 de* 1.0 * et16b510.fm
5 Operation
General information regarding work operation
Machine travel
Performing machine travel over obstacles can put a heavy load on the
undercarriage and cause damage. Avoid performing machine travel over
obstacles if possible.
If it cannot be avoided, lower the boom to ground level and travel over the
obstacle at low speed.
Traveling in speed range 2
Avoid starting machine travel and stopping abruptly as well as changing
direction suddenly on rough terrain.
The dozer blade must be at the front during travel speed 2.
Operation in water
Water must not reach any further than the upper edge of the tensioning
wheel.
Lubricate lubrication points again that were immersed in water for a longer
time in order to expel the old grease.
Do not immerse the live ring and upper carriage in the water.
Operation in salt water is prohibited.
Do not immerse the live ring and upper carriage in the water.
Operation near the sea
Clean the machine regularly when using it in a saline environment.
See chapter Cleaning and maintenance.
To Next Page
Loading...
Need help?
General
