BA ET16 de* 1.0 * et16w700.fm 7-1
Maintenance 7
7 Maintenance
7.1 Information on maintenance
Responsibilities and prerequisites
The working order and the service life of machines are heavily dependent
on maintenance.
Daily and weekly servicing and maintenance must be performed by
specifically trained personnel.
Have the maintenance, delivery inspection and the entries in the service
booklet performed by a Wacker Neuson service center, otherwise
warranty claims will not be acknowledged.
It is therefore in the interest of the machine owner to ensure optimal
machine operation.
Repair or replace defective parts immediately, even if they are not yet due
for replacement.
Repair or replacement of safety-relevant parts may be performed only by
a Wacker Neuson service center.
Use only original spare parts for repairs.
Wacker Neuson shall not be liable for damage to the machine or personal
injury caused by failure to observe the specific information and
descriptions.
Important safety instructions on maintenance
• Follow all safety instructions given in this Operator’s Manual.
• Follow the instructions given in chapter Safety, safety instructions
on maintenance and qualification of the operating and mainte-
nance personnel in this Operator’s Manual.
• Follow the maintenance and safety instructions given in the Operator’s
Manuals of the attachments.
• Wear protective equipment (for example hard hat, safety glasses,
protective gloves, safety boots).
• Observe the danger indications and safety instructions during maintenance.
• In order to avoid injury hazard, do not perform work on a hot or running
engine.
• Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
• Attach a warning label to the control elements (for example “Machine
being serviced, do not start”).
• Stop the machine (see Preparing lubrication).
• Do not re-use self-locking fasteners.
Maintenance
To Next Page
Loading...
Need help?
General
