2-16 BA ET16 de* 1.0 * Safety_01_0.fm
2 Safety
Modifications and spare parts
• Do not modify the machine and the work equipment/attachment (for
example the safety equipment, lights, tires, straightening and welding
work).
• Modifications must be approved by the manufacturer and performed by
an authorized service center.
• Use only original spare parts.
Protective structures
• The cabin, rollbar and protective screen are tested protective struc-
tures and may not be modified (for example no drilling, bending,
welding).
• Perform a visual check according to the maintenance plan (for
example check the fastenings for damage).
• If damage or defects are detected, have them immediately checked
and repaired by an authorized service center.
• Have retrofitting work only performed by an authorized service center.
• Replace self-locking fasteners (for example self-locking nuts) by new
ones after removing them.
To Next Page
Loading...
Need help?
General
