7-12 BA ET16 de* 1.0 * et16w700.fm
7 Maintenance
7.3 Fuel, lubricants and coolants
Hydraulic oil types
Application Fluid/lubricant Specification
Season/temper-
ature
Capacities
1
1. The capacities indicated are approximate values; the sight glass or the dipstick alone is relevant for the correct level.
Capacities indicated are no system fills
Engine
2
2. Sulfur content below 0.05 %, cetane number over 45
Diesel fuel
3
3. In countries where level IIIA (or higher) or Tier IV interim (or higher) exhaust emission regulations apply, use diesel fuels with a maximum sulfur content of
0.0015 % (= 15 mg/kg).
ASTM D975-94: 1D,
2D (USA)
Year-round
24 liters
(6.3 gal)
EN 590 (EU)
ISO 8217 DMX (Inter-
national)
BS 2869-A1, A2 (GB)
JIS K2204 (Japan)
KSM-2610 (Korea)
GB252 (China)
Coolant
Distilled water and anti-
freeze D40 Super/
ASTM 6210
4 liters
(1 gal)
Engine Engine oil
API: CG-4/CH-4/CI-4
ACEA: E3, E4, E5
-15 °C (-5 °F)
+45 °C (+104 °F)
About 3.4 l
(0.9 gal)
ACEA E3, E4, E5
(SAE10 W 40)
4
4. According to DIN 51511
Hydraulic oil reservoir
Hydraulic oil Eurolub HVLP 46
5
5. According to DIN 51524 section 3
Year-round
6
6. Depending on local conditions – see “Engine oil types” on page 7-13.
20 liters
(5.3 gal)
Biodegradable hydrau-
lic oil
7
7. Biodegradable hydraulic oil based on saturated synthetic esters with an iodine value of < 10, according to DIN 51524, section 3, HVLP, HEES.
Panolin HLP Synth 46
BP BIOHYD SE-S 46
Grease zerks Grease
KPF 2 K-20
8
ISO-L-X-BCEB 2
9
8. KPF 2 K-20 according to DIN 51502 lithium-saponified grease.
9. ISO-L-X-BCEB 2 according to DIN ISO 6743-9, lithium-saponified grease
Year-round As required
Battery terminals Acid-proof grease
10
10. Standard acid-proof grease NGLI category 2.
FINA Marson L2 Year-round As required
Control lever base Adhesive fluid grease Förch S401 Year-round As required
Viscosity class Ambient temperature
min. °C min. °F max. °C max. °F
ISO VG32 -20 -4 30 86
ISO VG46 -5 23 40 104
ISO VG68 5 41 50 122
To Next Page
Loading...
Need help?
General
