Maintenance
Chassis/safety devices
130
BA RD24_RD27 en 04
4.01 Chassis/safety devices
WARNING
Uncontrolled driving behaviour!
Severe injury or death due to separate machine movements.
■
Ensure that there are no persons or objects in the danger zone of
the machine (moved).
■
Do not check functioning of safety devices in case there is not
enough space.
NOTE
The machine must not be used if the safety devices do not
work.
Call the customer service!
4.01.01 Basic maintenance work
■
Check operating and safety instructions on the machine: Replace
damaged and/or non-readable signs.
■
Ensure that hinges and links move easily and lubricate lightly.
■
Check the function of the warning systems (e.g. signal horn,
reflectors, back-up alarm, blinker and warning flasher). Repair/change
defective alarm devices/defective parts of the alarm devices.
■
Check the function of the lighting. Replace defective lamps.
■
Check the firm fit of the screw connections which are subjected to
high loads, e.g. articulated joint, tie rod, drum suspension, wheel
suspension, drum drive, wheel drive.
■
Check that the air filter system is undamaged (e.g. no cracks in hoses
or enclosures). Replace defective parts.
4.01.02 Checking and replacing steps/slip-resistant surface
Regularly check the non-slip property of the surfaces of the steps and in
the driver's cab (e.g. sand-coated foil).
For steps:
Replace or regrind non-slip profiles with a minimum height of 1 mm.
For sand-coated foils:
Replace ineffective or worn foils.
To Next Page
Loading...
Need help?
General
