Operation
Function tests before starting work
BA RD24_RD27 en 04
67
3.03 Function tests before starting work
Check the following to ensure safe operation of the machine:
Test Refer to
Can the machine be accessed safely? see page 68
Has the driver's seat been adjusted? see page 69
Has the seat belt been tested? see page 72
Has the position of the seat been adjusted? see page 69
Has the supply voltage been activated via the battery isolating
switch?
see page 76
Are the turn signal and hazard warning lights working? see page 80
Is the horn working? see page 81
Are the lights working? see page 78
Is the reversing warning system working? see page 86
Is the rotating beacon working? see page 81
Is the parking brake working? see page 132
Is the EMERGENCY STOP working? see page 131
Has the fuel tank fill level been checked? see page 109
Has the coolant fill level been checked? see page 142
Has the hydraulic oil reservoir fill level been checked? see page 145
Has the water tank fill level been checked? see page 159
Has the additive tank fill level been checked? see page 159
Has the air pressure in the tyres been tested? see page 154
Has the scraper been tested? see page 151
To Next Page
Loading...
Need help?
General
