Maintenance
Dynamic compaction system
164
BA RD24_RD27 en 04
4.09 Dynamic compaction system
NOTE
Prior to maintenance works clean roller drums thoroughly.
4.09.01 Checking the damping elements
Switch off diesel engine and remove ignition key.
Check the damping elements [1] of the roller drum suspension for
cracks.
Let replace damaged damping elements by new ones. Contact the
customer service.
4.09.02 Replacing toothed belt for the oscillation drive
Only for roller drum with oscillation.
To avoid extended machine downtime, replace the toothed belts for the
oscillation drive after 2000 operating hours or at least every 2 years.
NOTE
This work may only be carried out by trained personnel.
Request assistance from customer services!
To Next Page
Loading...
Need help?
General
