Operation
Stopping the machine in normal operation
88
BA RD24_RD27 en 04
3.16 Stopping the machine in normal operation
Quietly and steadily move the drive lever to position 0 and stop it/let it
click into place there.
Set the motor speed to idle (MIN).
a
The hydrostatic transmission brakes the machine to a standstill.
a
The parking brake has not been activated.
Activating parking brake
Press the parking brake [1] switsch.
a
The parking brake is activated.
a
The parking brake indicator light [2] lights.
a
For versions with add-on equipment:
The parking brake switch [1] is lit.
NOTE
The parking brake cannot be released unless the drive lever is
latched in the 0 position.
To Next Page
Loading...
Need help?
General
