Operation
Using safety belt
72
BA RD24_RD27 en 04
3.06 Using safety belt
WARNING
Driving without safety belt!
Serious injuries or death can occur if the machine brakes suddenly or
tips over and the seat belt is damaged or not worn correctly.
■
Only drive the machine when wearing the seat belt.
■
Put on the seat belt correctly and do not twist it.
■
Make a visual examination of the seat belt when putting it on.
■
Have the seat belt immediately replaced by an authorized service
provider:
– If it is worn or damaged
– After an accident
– As a general rule, every 3 years
NOTE
When putting on and taking off the seat belt, avoid pulling it
jerkily or tightening it excessively.
Putting on belt
Pass the seat belt closely over the hips.
Adapt the length of the safety belt to your body size so as to ensure
that your freedom of movement is not restricted.
Insert the locking plate [1] into the belt lock [2].
a
Seat belt is applied and locked.
Loosing belt
Press knob at the buckle [2].
a
Seat belt is released.
Place the seat belt on the driver's seat or allow it to roll into the belt
retainer.
Seat belt buckle monitoring device (option)
For versions with add-on equipment:
To Next Page
Loading...
Need help?
General
