Operation
Driving
BA RD24_RD27 en 04
85
If the driver fails to react,
a
the machine will be braked until it stops after a total of 3 seconds,
and the working functions will be set to off.
a
The diesel engine continues running.
Braking is not initiated if the driver returns to his seat within 2 seconds of
leaving it.
If the machine is braked by the safety switch, the machine has to be
returned to its home position before operation .
Bring the machine into the home position - drive on after the
delayed braking.
Prerequisites:
■
Machine at a standstill, after the delayed braking.
■
Driver sitting on the seat again.
■
Diesel engine is running.
Move drive lever in position 0.
a
The work functions are active again.
3.15.02 Adjusting the engine speed
The speed of the diesel engine can be regulated between idling speed
and maximum speed using the adjusting lever. The lever is locked in
three notched positions. The lever can also be positioned between this
positions.
■
Idle speed - MIN
■
2/3 max. speed - 2/3 MAX
■
Max. speed - MAX
NOTE
The vibration frequency is coupled to the engine speed. The
adjustment of the engine speed will elements in the vibration
frequency (see Technical Data).
To Next Page
Loading...
Need help?
General
