Wacker Neuson RD24 User Manual

Maintenance
Hydraulic oil supply
BA RD24_RD27 en 04
147
Also actuate the steering.
a
The pipes and hose lines will be filled with oil and vented.
Check oil level with the diesel engine at a standstill. Top up oil if
necessary.
Check hydraulic system for leaks.
4.04.03 Replacing the filter insert in the pressure filter for the hydraulic system
$ Only lubricant with this marking is permitted ("Technical data",
page 165 ff.).
1
2
Switch off the diesel engine and remove the ignition key.
Allow the machine to cool down to less than 30 °C (86 °F).
Unscrew the barrel casing [1].
Version 1: Pull the filter insert [2] from the filter head and replace with
a new one.
Version 2: Unscrew the filter insert [2] from the filter head and replace
with a new one.
Clean the inside of the barrel casing [1].
Screw the barrel casing [1] back into the filter head and tighten.
Check that the hydraulic system is leak-tight.

Wacker Neuson RD24 Specifications

General

Brand	Wacker Neuson
Model	RD24
Category	Construction Equipment
Language	English