Preface
Preface
BA RD24_RD27 en 04
15
Positioning in illustrations
Figures are labelled with numbers.
Item lines connect the correct items in the figure with the numbers. The
numbers only annotate the items for the text section to which the figure
belongs. The numbering starts anew for each figure.
In descriptive text, these numbers are in square brackets. So you can
obtain important and additional information quickly.
The end of the item line is a point or an arrow. A point marks a visible
element in the figure. An arrow marks an invisible element, which lies in
the direction of the arrow.
If necessary, figures have legends to provide the information required.
Example
[1] Driver [2] Engine compartment
[3] Drive lever
Descriptive text
You use the drive lever [3] to determine the direction of travel and driving
speed.
1.00.07 Explanation of abbreviations
Abbreviations are used for machine elements and processes in this
instruction manual.
Abbreviations that are not in this list are explained the first time they
appear in the instruction manual.
Abbreviation Meaning
DPF Diesel Particulate Filter
Exhaust gas after-treatment system
FOPS Falling Object Protective Structure
Structure for the driver's cab and driver's platform
to protect against falling objects
KAG Edge pressing and cutting device
Edge forming device
RMV Resonance Measurement Value
Measured value for the resonance behaviour of
the compaction system
ROPS Roll Over Protective Structure
Structure for the driver's cab and driver's platform
to protect against rolling over
To Next Page
Loading...
Need help?
General
