To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if wsm L2800 engine overheated?
If your wsm Tractor engine is overheating, you can try the following: Replenish coolant, change or adjust, replenish coolant, clean, clean or replace, clean or replace, replace, loosen the load, replace, adjust, use the specified fuel.
What to do if wsm L2800 starter does not run?
If the starter on your wsm Tractor isn't running, try these solutions: Charge the battery, repair or replace the starter, repair or replace the solenoid switch, repair or replace the wiring, replace the starter motor, connect the wiring, connect the wiring.
What to do if wsm L2800 Tractor has deficient output?
If your wsm Tractor has deficient output, you can try the following: Adjust, repair or replace, repair or replace the injection pump, repair or replace the nozzle, replace head gasket, tighten cylinder head bolt, glow plug and nozzle holder.
General| Engine Power | 28 hp |
|---|---|
| Drive | 4WD |
| Engine Type | Diesel |
| Transmission | Hydrostatic |
| Hydraulic System | Open Center |
| Type | Tractor |
| Fuel Tank Capacity | 6.6 gal |
