6Setups
114
Maximum Stored Pages
Specifies the maximum number of pages that can be stored in memory when you copy
documents. Select a number in the range from 1 to 999.
Mailbox Receive Display Priority 1 to 3
Specifies the display priority to the fax documents in mailboxes. Select from [F Code],
[Remote Terminal ID], and [Remote Terminal Name].
Direct Fax
Specifies whether to enable or disable the Direct Fax feature.
Line 1 - Line Selection
Specifies whether to use Line 1 for both fax transmission and fax reception, or for fax
reception only.
Fax Received Options
This feature allows you to sort received documents by incoming line to specified
mailboxes or to the output trays.
1.
Select [Fax Received Options]
in the [Features] menu.
2.
Change the required settings.
3.
Select [Close].
Mailbox Selector Setup
Specifies the mailbox for storing received documents sorted by the incoming line. Up
to 200 mailboxes can be registered.
NOTE: Before using this feature, select [Enabled] in the [Mailbox Selector Setup]
feature on the [Fax Control] screen.
• Fax Received - Line 1
Specifies whether incoming documents on this line are stored in a mailbox. Select
[On] to display [Mailbox Number].
Output Destination Setup
Specifies the output tray for printing received documents sorted by the incoming line.
The output tray for [Public Mailbox Printed Documents] can also be set.
• Fax Received - Line 1
Specifies the output tray.
• Public Mailbox Printed Documents
Specifies the output tray for documents printed from public mailboxes, both
manually and automatically using job flow sheets.
Reduce/Enlarge Presets
This feature allows you to configure or change the reduction/enlargement ratio buttons
that appear when [Preset %] is selected on the [Reduce/Enlarge] feature on the [Layout
Adjustment] screen.
To Next Page
Need help?
General
