Specifications
423
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the System Administrator. For information on setting the
paper size table, refer to
Paper Size Settings in the Setups chapter on page 78.
Paper Supply
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the System Administrator. For information on setting the
paper size table, refer to
Paper Size Settings in the Setups chapter on page 78.
Tray 1, Tray 2, and Trays 3 & 4 (Two Tray Module)
Capacity: 500 sheets of 80 g/m
2
(20 lb bond) paper per tray
NOTE: The paper stack must not exceed 54 mm (2.1 inches) in height.
Paper Weights:
60 to 105 g/m
2
for Tray 1
60 to 215 g/m
2
for Tray 2, Trays 3 & 4, (Two Tray Module)
Paper Sizes: For width: 139.7 to 297.0 mm (5.5 to 11.8”) / For length: 182.0 to 431.8
mm (7.2 to 17.2”)
Auto Size Sensing: Yes
Tray 5 (Bypass)
Capacity: Approx. 100 sheets*
*: Standard paper 4200 3R2047 20lb
NOTE: The paper stack must not exceed 10 mm (0.4 inch) in height.
Paper Weight: 60 to 215 g/m
2
Paper Sizes: For width: 88.9 to 297.0 mm (3.6 to 11.8”) / For length: 98.4 to 431.8 mm
(3.9 to 17.2”)
Auto Size Sensing: Yes
Trays 3 & 4 (High Capacity Tandem Tray)
Capacity: Approximately 2,000 sheets (800/1,200 sheets)
Paper Sizes: A4 LEF, 7.25 x 10.5” LEF, 8.5 x 11” LEF
Paper Weight: 60 to 215 g/m
2
Tray 6 (High Capacity Feeder)
Capacity: Approximately 2,000 sheets
Paper Sizes: A4 LEF, 7.25 x 10.5” LEF, 8.5 x 11” LEF
Paper Weight: 60 to 215 g/m
2
Double-sided Module
Paper Sizes: For width: 148.7 to 241.0 mm (5.9 to 9.6”) / For length: 98.4 to 162.0 mm
(3.9 to 6.4”)
Paper Weight: 60-105 g/m
2
To Next Page
Loading...
Need help?
General
