16 Appendix
422
WorkCentre 5225
A4/8.5 x 11" LEF: 25 cpm (cycles per minute) (1 sided)
A4/8.5 x 11" LEF: 25 cpm (cycles per minute) (2 sided)
A3/11 × 17” SEF: 14 cpm (cycles per minute) (1 sided)
A3/11 × 17” SEF: 9 cpm (cycles per minute) (2 sided)
WorkCentre 5230
A4/8.5 x 11" LEF: 30 cpm (cycles per minute) (1 sided)
A4/8.5 x 11" LEF: 30 cpm (cycles per minute) (2 sided)
A3/11 × 17” SEF: 16 cpm (cycles per minute) (1 sided)
A3/11 × 17” SEF: 11 cpm (cycles per minute) (2 sided)
First Copy Out Time
From Tray 1/A4 or 8.5 x 11" LEF: 4.3 seconds or less
Warm-up Time
Cold Start: Within 26 seconds (varies with machine configuration)
Document Glass
Capacity: A document within 30 mm of thickness can be copied with the document
glass cover / feeder closed.
Document Sizes: (Standard size) A5 LEF to A3 SEF (5.5 x 8.5 to 11 x 17 SEF)
(Custom size) width: Up to 297 mm (0.6 to 11.7”) / length: Up to
432 mm (0.6 to 17.0”).
Auto Size Sensing: Yes
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the System Administrator. For information on setting the
paper size table, refer to
Paper Size Settings in the Setups chapter on page 78.
Document Feeder
Capacity:75 sheets of 50 to 80 g/m
2
Document Sizes:
Maximum document size:
297 mm (W) x 432 mm (11.7 x 17.0”)
Minimum document size:
139.7 mm (W) x 210 mm (5.5 x 8.3”)
Long Document Scan feature for Fax mode:
297 mm (W) × 600 mm (11.7 × 23.6”)
NOTE: The Long Document Scan feature is not available in the double-sided mode.
When using this feature to scan long documents which exceed 432 mm (17.0 inches),
the operator must feed the document one sheet at a time. The paper weight should be
between 60 and 90 g/m
2
.
Document Weight: 38 to 128 g/m
2
(50 to 128 g/m
2
in double-sided mode)
Mixed Sizes: Yes - If so specified on the machine and the lead edges of documents
have the same dimension.
Auto Size Sensing: Yes
To Next Page
Loading...
Need help?
General
