System Settings
115
1.
Select [Reduce/Enlarge
Presets] in the [Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
R/E Preset 1 to 7
•Preset %
Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select
from 25 options in the range of 50-400%.
• Variable %
Specifies the reduce/enlarge ratios using the scroll buttons in the range of 50% to
400% in 1% increments.
Original Size Defaults
This feature allows you to configure or change the scan size buttons on the [Original
Size] feature on the [Layout Adjustment] screen.
1.
Select [Original Size Defaults] in
the [Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Original Size 1 to 11
• A/B Series Size
Specifies standard document sizes in A/B series. Use the scroll buttons to switch
between screens.
•Inch Size
Specifies standard document sizes in Inch series. Use the scroll buttons to switch
between screens.
• Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between
screens.
Local Terminal Information
This feature allows you to register or change the local terminal information.
1.
Select [Local Terminal
Information] in the [Features]
menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
To Next Page
Loading...
Need help?
General
