Xerox D110 User Manual

Standard path
1 Incoming print job
This paper path moves the incoming paper to the compiler tray.
2 Compiler tray
Upon arrival to the compiler tray, the paper is then assembled into a book block.
3 Sub-grip/main grip
The sub-grip and main grip move the book block to the adhesive unit.
4 Bypass transport
If designated, an incoming cover is moved along the bypass transport to the adhesive
unit and awaits the book block.
5 Adhesive unit
Adhesive is applied to the spine of the book block.
6 Binding area
The adhesive-coated book block and cover media are bound together and then continue
to the next phase of the binding process. If no cover media was specified, the book
block continues through the paper path for trimming and delivery to the book stacker
tray.
7 Trimming
The three unbound edges of the book are trimmed to size by the cutter unit.
User Guide21-10
Perfect Binder (D110/D125/D136 with integrated controller)

Xerox D110 Specifications

General

Brand	Xerox
Model	D110
Category	Printer
Language	English