b) Select Fold & Staple.
c) From the Booklet Creation - Fold & Staple screen, select either Fold Only or Fold
& Staple.
To access the Trimmer feature, select the Booklet Trimming/Pressing button.
4. From the Folding screen, select Single Fold.
a) Select Fold as a Set.
b) Select Booklet Trimming/Pressing button to access the Trimming feature.
Hints and tips
Printing full-page images on booklets
When using full-page images, ensure that the finished booklet size accommodates any
full-page images, and that when the booklet is trimmed, these images are not truncated.
Refer to the illustration.
1. This booklet has preprinted front and back covers with a full-page image. It was
printed on 8.5 x 14 in./B4 paper. The front cover, which was trimmed, displays the
entire image.
2. This same booklet was printed on 8.5 x 11 in./A4 paper. The image on the front
cover is truncated after trimming it.
Before you print any booklet job, you should consider your whole job, including the
following:
• What is the desired size of the finished booklet?
• Does the booklet contain full-page images?
• Are you using preprinted covers with full-page images?
• Are you trimming the booklet?
• Do you need to shift any full-page images in order to ensure they fit on the finished
booklet?
23-11Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
SquareFold Trimmer Module
To Next Page
Loading...
Need help?
General