Xerox D110 User Manual

9. Close the front cover completely. The machine will not operate if the front cover is
open even slightly.
Fault codes
Cause and RemedyFault code
Cause: Unable to process job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
002-770
Cause: Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings.
003-750
Cause: The machine is unable to process size, because the specified document
area is too small.
Remedy: Increase resolution or scan area size.
003-751
Cause: The selected resolution was too large for scanning mixed size originals
using document feeder.
Remedy: Decrease Scan Resolution to 200dpi or less, and rescan.
003-753
Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.
003-754
Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.
003-755
Cause: An incompatible combination of features is specified in the document scan
conditions.
Remedy: Check the selected options.
003-760
Cause: The paper size of the tray selected for auto tray is different from the paper
size of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the Paper Type Priority
settings.
003-761
Cause: No document is scanned by Form Overlay.
Remedy: Prepare 2 documents or more.
003-764
Cause: When enlarging/reducing a scanned document to the specified paper size,
the reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
Manually enter a reduction/enlargement ratio.
Change the paper size.
003-795
Cause: An error occurred in the document feeder.
Remedy: Power-cycle the machine. Contact the Customer Support Center.
005-275
005-280
005-281
005-282
005-283
005-284
User Guide15-16
Problem solving

Xerox D110 Specifications

General

Brand	Xerox
Model	D110
Category	Printer
Language	English