Note
To prevent injury, do not put your fingers on top of the container.
7. Push R5 until the lock lever moves to the locked position.
8. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Empty the Punch Waste Container
The UI displays a message indicating when it is time to empty the Punch Waste
Container.
Caution
Only remove the Punch Waste Container while the system is powered ON. If you switch
off the power when emptying the container, the machine cannot detect that the
container was emptied.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
User Guide22-12
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General