Managing the Job Queues 57
To move a job down in the queue:
¾
Right-click the job and select one of the following options:
Demote: to move the job down one step
Demote to bottom: to move the job to the bottom of the queue.
Suspending and Resuming Queues
If necessary, you can stop a queue temporarily and then later continue its operation
afterwards. To do this, use the suspend and resume buttons:
To suspend a queue:
¾
Click the suspend button .
The button turns red (suspend mode), and the processing/printing stops after
the current job has finished running.
To resume a queue:
¾
Click the resume button .
The button turns green (resume mode), and the top job in the queue starts
processing/printing.
Aborting a Running Job
To stop processing or printing a running job:
¾
Right-click the running job in the Queues window, and from the menu, select
Abort.
The job moves from the queue to the Storage
window, and the Alerts window is
updated.
The
Aborted
status is assigned to the job, and the next job in the queue starts
running.
To Next Page
Loading...
Need help?
General
