206 Chapter 8 – Setting Parameters
2. Select an Output Tray:
• SCT (simple catch tray)
• OCT (offset catch tray)
• To p Tr a y
• Stacker
• Booklet Maker
• Tri-Fold
3. Select the desired Output Tray finishing options:
• Offset to use an offset between sets
• Stapler to use staples
• From the Position list, select the staple position.
• Puncher to punch holes
• From the Ty p e list, select the number of holes.
• Z Fold Half Sheet to fold a sheet of paper in half, in a z-shape—for example,
if you need to insert an A3-size sheet into an A4-size job.
• C Fold to fold a sheet into a c-shape
• Z fold to fold a sheet into a z-shape
The Exceptions Tab
The Exceptions tab enables you to add and delete page exceptions and inserts.
Exceptions are special pages in a job for which you want to assign different paper
stock. For example, you can assign a different paper stock for each chapter within a
book.
Note: The Module option that you select determines which trays are
available in the
Output Tray list.
Note: The
Module option and Output Tray that you select determines
which methods are available.
To Next Page
Loading...
Need help?
General
