Xerox VersaaLink B600 User Manual

SolutionsProbable Causes
Remove the paper, smooth it out, and reload it. If it still
misfeeds, do not use that paper.
The tray contains warped or wrinkled paper.
Remove the moist paper and replace it with new, dry
paper.
The paper is moist from humidity.
Use only Xerox approved paper. For more information,
refer to Supported Paper.
Using paper of the wrong size, thickness, or type.
With a clean, lint-free cloth moistened with water, wipe
the feed rollers until they are clean. For more informa-
tion, refer to Cleaning The Printer.
The feed rollers are dirty.
Label and Envelope Misfeeds
SolutionsProbable Causes
The label sheet is facing the wrong way in the tray.
• Load label sheets according to the instructions from
the manufacturer.
• Load labels in the tray, face up.
• For more information, refer to Labels.
Do not use any sheet where labels are missing, curled,
or pulled away from the backing sheet.
Labels are missing, curled, or pulled away from the
backing sheet.
You can print envelopes from the Bypass Tray or Tray
1.
For more information, refer to Envelopes.
Envelopes are loaded incorrectly.
Envelopes are wrinkling.
• The heat and pressure of the laser printing process
can cause wrinkling.
• Use supported envelopes.For more information, refer
to Guidelines for Printing Envelopes.
Note
When you load envelopes long-edge feed, ensure that
you specify landscape orientation in the print driver.
Paper Jam Message Stays On
Note
Check for, and remove, torn pieces of paper in the paper path.
SolutionsProbable Causes
Recheck the paper path and make sure that you have
removed all of the jammed paper.
Some paper remains jammed in the printer.
Xerox
®
VersaaLink
®
B600/B610 Printer8-16
User Guide
Troubleshooting

Xerox VersaaLink B600 Specifications

General

Brand	Xerox
Model	VersaaLink B600
Category	Printer
Language	English