Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
• Use only Xerox-approved paper. For more information, refer to Supported Paper.
• Use only dry, undamaged paper.
Caution
Some paper and other media types can cause poor output quality, increased paper jams, or damage
your printer. Do not use the following:
- Rough or porous paper
- Inkjet paper
- Paper that is photocopied
- Paper that is folded or wrinkled
- Paper with cutouts or perforations
- Stapled paper
- Envelopes with windows, metal clasps, side seams, or adhesives with release strips
- Padded envelopes
- Plastic media
- Transparencies
• Ensure that the paper type selected in your print driver matches the paper type on which you are
printing.
• If you have the same size paper loaded in more than one tray, ensure that the proper tray is selected
in the print driver.
• Store your paper and other media properly for optimum print quality. For more information, refer to
Paper Storage Guidelines.
Solving Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table, then refer to the
corresponding solution to correct the problem. You can also print a Demonstration Print page to more
precisely determine the print-quality problem. For more information, refer to Information Pages.
If the print quality does not improve after performing the appropriate action, contact your Xerox
representative.
Note
To maintain print quality, the toner cartridge is designed to provide a warning message when the toner
level is low. When the toner cartridge reaches this level, a warning message appears. When the toner
cartridge is empty, another message prompts you to replace the toner cartridge. The printer stops
printing until you install a new toner cartridge.
Xerox
®
VersaaLink
®
B600/B610 Printer8-18
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General