Xerox VersaaLink B600 User Manual

SolutionsSymptom
• Ensure that the margins are set correctly in the ap-
plication that you are using.
• Adjust the paper registration. For more information,
refer to Adjusting Paper Registration.
The printed surface of the paper is bumpy. 1. Print a solid image over the entire surface of one
sheet of paper.
2. Load the printed sheet into the tray with the printed
side face down.
3. Print five blank pages to remove debris from the
fuser rollers.
Spots or lines appear at regular intervals on the prints. 1. Print the Repeating Defects pages.
At the control panel, touch Device > Support >
Support Pages > Repeating Defects.
2. To determine the cause of the problem, measure
the distance between the print defects.
• 28 mm (1.1 in.): Drum Cartridge
• 31 mm (1.2 in.): Drum Cartridge
• 42 mm (1.7 in.): Drum Cartridge
• 52 mm (2.0 in.): Drum Cartridge
• 94 mm (3.7 in.): Drum Cartridge
• 46 mm (1.8 in.): Transfer Roller
• 82 mm (3.2 in.): Fuser
• 94 mm (3.7 in.): Fuser
3. If the repeating defects matches one of the dis-
tances, replace the matching component.
Getting Help
Your printer includes utilities and resources to help you troubleshoot printing problems.
Xerox
®
VersaaLink
®
B600/B610 Printer8-22
User Guide
Troubleshooting

Xerox VersaaLink B600 Specifications

General

Brand	Xerox
Model	VersaaLink B600
Category	Printer
Language	English