Powering On the Machine
Xerox® WorkCentre® 3025
User Guide
17
Network Menu
You may set up the network using the machine's display screen. Before doing that, you must have the
relevant information concerning the type of network protocols and computer system you use. A
password may be required to access and change the Network Setups. See the Installation and Setup
chapter for information on setting up the network.
Access the Network menu with the Machine Status button. The following options are available on the
Network menu:
• TCP/IP (IPv4)
• TCP/IP (IPv6)
•Ethernet
•Wi-Fi
•Protocol Manager
• Network Configuration
• Clear Settings
Alternatively, you may set up the network using CentreWare Internet Services by selecting Properties >
Network Settings.