Xerox WorkCentre 3025BI User Manual

CentreWare® Internet Services
Xerox® WorkCentre® 3025
User Guide
36
Adjusting the Altitude
Print quality is affected by atmospheric pressure, which is determined by the height of the machine
above sea level. The following information will guide you on how to set your machine for the best print
quality. Wi-Fi must be configured before you adjust the altitude.
Before you set the altitude value, determine the altitude where you are.
To adjust the altitude
1. Enter the IP Address of the printer in the browser.
2. Select Login and enter the ID (admin) and Password (1111).
3. Select Properties > System > Setup.
4. Select an Altitude Adjustment value, based on your altitude in the table above.
5. Select Apply.
Altitude Value
0 - 1000 M
0 - 3,280 ft.
Normal
1000 - 2000 M
3,280 - 6,561 ft.
High 1
2000 - 3000 M
6,561 - 9,842 ft.
High 2
3000 - 4000 M
9,842 - 13,123 ft.
High 3
4000 - 5000 M
13,123 - 16,404 ft.
High 4

Xerox WorkCentre 3025BI Specifications

General

Brand	Xerox
Model	WorkCentre 3025BI
Category	Copier
Language	English